[2010] QX56 driver's seat

[retho78]

Hi,

I'm new to this forum and wanted get some tips on replacing the front driver's side bottom cushion cover. The bottom cushion cover is worn out and I wanted to replace it with a new one. I know the upper back seat has the airbags in it so I didn't want it deploying on me or something else happen while I work on it.

Is it okay to disconnect all the wires that are under the seat if I have to pull the seat out and remove bottom cover off?

Any tips or instructions that I could use before tackling this job?


Thank you in advance.

 

[marctronixx]

remove ALL POWER from the car. wait at least an hour before you start removing harnesses and when working around air bags. stored energy can be built up for a while after key off so be aware.

 

[retho78]

Thank you. I'll disconnect the battery wire and let it sit overnight before messing with it. Anyone have any picture illustrations or service manual for this removal, just in case I might need it during this process?


Thank you.

 

[marctronixx]

go to x.infinitihelp dot com and grab the service manual

______________________________

 

[retho78]

I'll check it out...thank you!