Latest activity

What's new New posts Latest activity
  • M
    marctronixx reacted to pjdavep's post in the thread Bad starter with Like Like.
    Another AHA moment and hopefully it helps others. The exploded diagram on EM-30 shows recommended torque pressure, and I assumed they'd...
  • primov8
    primov8 reacted to pjdavep's post in the thread Bad starter with Like Like.
    Another AHA moment and hopefully it helps others. The exploded diagram on EM-30 shows recommended torque pressure, and I assumed they'd...
  • P
    pjdavep replied to the thread Bad starter.
    Another AHA moment and hopefully it helps others. The exploded diagram on EM-30 shows recommended torque pressure, and I assumed they'd...
  • primov8
    primov8 replied to the thread Bad starter.
    Before I confuse you anymore, I am referring to the recommended torque pressure (11 N•m or 8 ft/lb) AND the order of the bolts.
  • P
    pjdavep replied to the thread Bad starter.
    Aha, so when you say 'torque to spec', you are not referring to a torque wrench to put Xft-lbs of pressure, but rather the ordering of...
  • primov8
    primov8 replied to the thread Bad starter.
    Confused? Hopefully never. Its 11N•m. EM-31 has the exploded view of the IM, TB, gaskets, bolts, etc. and also shows the torque #s for...
  • P
    pjdavep replied to the thread Bad starter.
    Ha! I recall that thread, and thought...."this guy is a maniac, but I like him" :ROFLMAO: I am VERY HAPPY you posted this because I...
  • primov8
    primov8 reacted to marctronixx's post in the thread Low fuel pressure with Like Like.
    the petrol pump and screen/filter are located in the tank.
  • primov8
    primov8 replied to the thread Bad starter.
    The IM has 8 individual gaskets + 1 tb gasket. You'll want to replace those because you don't want to have to do it over again because...
  • P
    pjdavep replied to the thread Bad starter.
    Sorry, now I'm a little more confused. You ordered what, the gaskets? You just replaced those since you had it open? And you were...
  • primov8
    primov8 replied to the thread Bad starter.
    Yes it is. For the intake manifold and throttle body gaskets, I ordered it from infinitipartsdeal.com.
  • P
    pjdavep replied to the thread Bad starter.
    This is the video I watched - Is the pigtail sensor you speak of at the 5:37 mark of the video? Thanks!
  • P
    pjdavep reacted to primov8's post in the thread Bad starter with Like Like.
    I removed the intake manifolds on my QX80 and my previous 04 Armada; the QX80 is hands down, much easier to remove. Unlike the first...
  • primov8
    primov8 replied to the thread Bad starter.
    I removed the intake manifolds on my QX80 and my previous 04 Armada; the QX80 is hands down, much easier to remove. Unlike the first...
  • P
    pjdavep posted the thread Bad starter in Infiniti QX56 Forum.
    2011 QX56 - around 170k miles - dead in the garage. Wife went to leave the other day, comes back inside and says car won't start. I...
Show older items
Top