kevindubrow
New member
- Joined
- Aug 9, 2008
- Messages
- 13
- Reaction score
- 0
- Points
- 0
Up until recently the passenger seat was able to recline and move forward and backward but now it will only recline.
If I recline the seat and push the lever forward or backward at the same time I can hear a little strain on the motor (just like it does on the driver's seat).
I have checked all of the wires underneath the seat and they are connected.
Does anyone know whats going on? It is becoming a problem because this happened while I was removing the seat to change the seat belt buckle and I can not reinstall the seat because it is blocking one of the floor bolts.
Thanks!
Edit: I saw a previous post on this subject....apparently I should try tapping the motor with a hammer. I'll report back tomorrow when I have some light to work with.
If I recline the seat and push the lever forward or backward at the same time I can hear a little strain on the motor (just like it does on the driver's seat).
I have checked all of the wires underneath the seat and they are connected.
Does anyone know whats going on? It is becoming a problem because this happened while I was removing the seat to change the seat belt buckle and I can not reinstall the seat because it is blocking one of the floor bolts.
Thanks!
Edit: I saw a previous post on this subject....apparently I should try tapping the motor with a hammer. I'll report back tomorrow when I have some light to work with.
Last edited:
